background image

8

Picking A Location

Location Considerations:

• Choose a location from which the
sensor can “see” all the paths of
movement that will be illuminated 
by its lights.

• Good Night Light may be wall or
ceiling mounted.

• Sensor must be below and as far
as possible away from lights. If ceiling
mounted, be sure there are no lights
below sensor

Sensor functions best when the
direction of expected movement
is across its detection pattern, not
towards the sensor.

• If wall mounting, locate 6-10’ high
for optimum range and detection.
Lower mounting height will reduce
range.

Detection Pattern

• The sensor has a “Double Look
Down” Lens with one “Look Out”
zone and two “Look Down” zones,
for excellent detection both at long
and close range.

Detection extends out a maximum 
of 30 feet and is 180° wide.

• To reduce the Detection Pattern
length, aim the sensor down

• To reduce Detection Pattern 
width, mask the sides of the lens
with the Lens Mask Kit provided or
opaque weatherproof tape.

• If sensor is mounted by a doorway
at the top of stairs, be aware that 
the elevated mounting height may
extend the sensors range.

• As distance from the sensor
increases, it will take more move-
ment to be detected. For instance, 
at 10 feet, a half step will be enough,
while at 30 feet, several steps will 
be necessary.

Side View    30’

Double Look Down Lens

8’

60’

Less Sensitive

More Sensitive

30’

Содержание GoodNight Light

















Отзывы: