![background image](http://html1.mh-extra.com/html/rab-lighting/lightcloud-smart-led-post-top/lightcloud-smart-led-post-top_manual_3118764003.webp)
CAUTION
• These LED Lamps require all ballasts, capacitors, and ignitors to be
bypassed or removed. Do not operate lamps on existing ballasts.
• Before installation make certain the AC power to the fixture is off.
• For use in enclosed fixtures.
• Risk of fire or electric shock. Luminaire wiring and electrical parts may
be damaged when drilling for installation of LED retrofit kit. Check for
enclosed wiring and components.
• Risk of fire or electric shock. LED Retrofit lamp installation requires
knowledge of luminaires electrical systems. If not qualified, do not
attempt installation. Contact a qualified electrician.
• Do not make or alter any open holes in an enclosure of wiring or
electrical components during kit installation.
• Installers should not disconnect existing wires from lampholder
terminals to make new connections at lampholder terminals. Instead
installers should cut existing lampholder leads away from the
lampholder and make new electrical connections to lampholder lead
wires by employing applicable connectors.
• To prevent wiring damage or abrasion, do not expose wiring to edges
of sheet metal or other sharp objects.
• Risk of fire or electric shock. Install this kit only in luminaires that have
the construction features and dimensions shown in the photographs
or drawings and where the input rating of the retrofit kit does not
exceed the input rating of the luminaire.