SERIAL NUMBER
ON STICKER
BACK OF RIGHT HAND COLUMN ASSEMBLY
6703 ZINSER ST., SCHOFIELD, WI 54476
PHONE: 800.298.4351 FAX: 866.882.9475
www.raproducts.com
VERSION DATED: 9/8/11
K&A MANUFACTURING
HAND SWITCH
PAGE 3 OF 3
NewHeights ELECTRIC HEIGHT ADJUSTABLE WORKSTATION OPERATION INSTRUCTIONS:
CAUTION! TO PREVENT PINCHING OR COLLISION, MAKE SURE THAT YOU, YOUR FINGERS,
AND OTHER OBJECTS ARE AT LEAST 3/4" FROM THE TABLE'S EDGES AND TRAVEL PATH.
STARTUP/RESET PROCEDURE:
STEP 1:
PLUG THE POWER CORD FROM THE CONTROL BOX INTO A STANDARD 110 VOLT
RECEPTACLE.
STEP 2:
TO SET THE WORKSTATION, PRESS AND HOLD THE DOWN BUTTON ON THE HAND
SWITCH UNTIL THE WORKSTATION STOPS AT ITS LOWEST POSITION. THE NewHeights WORK-
STATION IS NOW READY FOR USE.
IF YOU ARE HAVING ANY PROBLEMS WITH THE PREVIOUS STEPS, CONTACT RIGHTANGLE
SERVICE AT THE NUMBER ABOVE LEFT OR [email protected].
TROUBLESHOOTING:
IF THE WORKSTATION STOPS OPERATING OR A POWER FAILURE OCCURS, UNPLUG THE
POWER CORD FROM THE RECEPTACLE AND REPEAT
STEP 1 AND STEP 2
ABOVE.
WARRANTY INFORMATION:
NewHeights PRODUCTS ARE WARRANTED TO BE FREE OF DEFECTS DUE TO
MANUFACTURING OR MATERIALS AS FOLLOWS: 2 YEARS ON THE GEAR AND/OR MOTOR,
INCLUDING THE CONTROL BOX AND HAND SWITCH. 5 YEARS ON THE SUPPORT BRACKETS,
ALUMINUM COLUMNS AND FEET. WE WILL REPLACE ANY DEFECTIVE PART AFTER
INSPECTION BY AN AUTHORIZED AGENT. COSTS INCURRED DUE TO PRODUCT
REPLACEMENT SUCH AS INSTALLATION, LABOR CHARGES OR TRANSPORTATION ARE NOT
COVERED UNDER THIS WARRANTY. WHEN CORRESPONDING WITH RIGHTANGLE
PRODUCTS, RECORD AND PROVIDE THE SERIAL NUMBER LOCATED ON THE BACK
PORTION OF THE RIGHT HAND COLUMN ASSEMBLY. SEE THE DETAIL BELOW.
SPECIAL NOTE:
DO NOT USE ANY ABRASIVE CLEANERS ON THIS UNIT.
