RA GP125i, Руководство по обслуживанию

Страница: 125 / 167

124
3. OBD fault indicator description and control
The fault indicator is generally an indicator light that can be displayed on the speedometer and the shape meets the
requirements of the regulations.
The fault indicator described as follows:
①
In the normal mode, no fault code:
Turn on the ignition switch, ECU initializes, the fault lights are on, and the MIL lights go out immediately after the
engine starts successfully.
②
When produce the fault code:
At the time of engine operation, if the fault occurs, the fault lamp is light on, which reminds drivers to have faults.
When the engine is stopped, the fault will be stored in the ECU.
③
Have fault code:
Under the special situation, Can turn off the key and keep more than 10 seconds, and then fast continuous switch key 5
times to reset the ECU, the ECU reset will clear all self-learning data, after reset the vehicle may have some abnormal
conditions. The ECU will need learning again to restore normal.