BD-C Series
-PB
▣ Cautions during Use
1. Follow instructions in 'Cautions during Use'. Otherwise, it may
cause unexpected accidents.
2. Do not install where strong magnetic or electric field exist.
Otherwise, the resolution may be adversely affected.
3. Wire as short as possible and keep away from high voltage
lines or power lines, to prevent surge and inductive noise.
4. For the optimized performance, it is recommended to
measure after 30 minute from supplying power.
5. When detecting with the maximum sensitivity, an error may
occur depending on each characteristic deviation.
6. This unit may be used in the following environments.
①Indoors/Outdoors (in the environment condition rated in
'Specifications')
②Altitude max. 2,000m
③Pollution degree 2
④Installation category II
Power indicator (POWER):
Green, Displays power supply.
Status Reason
Solution
On
Power is
supplied.
-
Off
Power is not
supplied.
After checking the connection
between communication converter
and amplifier unit correctly,
reconnect the device.
Communication output indicator (TX):
Green, Displays communication output status from
communication converter to external device.
Status Reason
Solution
Flashing Signal is
outputting.
-
Off
Signal is not
outputting.
-
Communication input indicator (RX):
Green, Displays communication input status from
communication converter to external device.
Status Reason
Solution
Flashing Signal is
inputting.
-
Off
Signal is not
inputting.
-
Communication error indicator (ERROR):
Red, Displays the communication status of communication
converter.
Status Reason
Solution
On
Connection is
bad between
communication
converter and
amplifier unit.
After checking the connection
between communication converter
and amplifier unit correctly,
reconnect the device.
Flashing
Communication
is bad between
communication
converter and
amplifier unit.
After checking the connection
between communication converter
and amplifier unit correctly,
reconnect the device.
Apply noise prevention to
communication converter and
amplifier unit.
Off
Operation is
normal.
-
POWER TX
RX ERROR
▣ Status Indicators
ООО “РусАвтоматизация”
454010 г. Челябинск, ул. Гагарина 5, оф. 507
тел. 8-800-775-09-57 (звонок бесплатный), +7(351)799-54-26, тел./факс +7(351)211-64-57
русавтоматизация.рф;
www.rusautomation.ru
