Instruction Manual The Fischer R13 page 4 of 33
necessary, The Fischer
®
and any other equipment should be
observed to verify that they are operating normally.
Place The Fischer
®
and water bath trays on a firm, level surface.
Please always cover the treatment electrodes with the foam
inserts or sponge pads provided; otherwise, you might risk
burns (electrical burn injuries, current marks). Avoid direct
contact with the electrodes!
Do not use the wearable parts (foam inserts and sponge pads)
for more than 18-months and replace them on time.
Make sure that The Fischer
®
is stored at room temperature
before you power it up. Depending on storage conditions, the
temperature adaptation may take up to 2 hours.
Prior to starting a treatment session, please remove any metallic
jewelry (rings, watches, bangles etc.), as electric current
concentrations in these regions might result in minor injuries
(local electrical burns, current marks).
Any small skin lesions or breaks must be covered with
petroleum jelly (Vaseline) to insulate them from the current flow.
Depending on the current strength selected, users may
experience tingling or stinging sensations (discomfort) during
the treatment.
If the current is set too high, you may experience painful
sensations all over the treated extremities.
You may remove your hands or feet safely from the treatment
trays any time. In very rare cases, unpleasant electric shocks
may occur; these are, however, absolutely harmless.