Copyright © 2021 R9 Technology Inc. All rights reserved.
11
6
Physical Dimensions
All dimensions are shown in millimeters.
7
Installation
To facilitate mounting, the SN400 is provided with two rear facing magnets for easy
attachment to a ferrous metal, steel surface. Alternatively, a fastener screw, or double-
sided adhesive foam tape can be used on the top flange for mounting to a wall or other
flat surface. The node will frequently be attached to large equipment, and should always
be located as high as possible on the equipment (for best wireless performance). Sensor
cables should always exit the bottom of the enclosure in a downward direction (for first
few inches) to prevent ingress of moisture or other contaminants. A separate document,
the
SN400 Installation Guide
is available that covers the installation of the SN400
product and cabled sensors, at a user site, for remote monitoring of sensor data.