R2TECK DVL-2, Руководство пользователя

Страница: 15 / 25

13
[6]: Monitor the receiver work status
Light status Description Action
Flash regularly Receiver works well NA
Other status
Receiver does not work
well
Connect the power again
[7]: Monitor the transmitter and receiver connect status
Light status Description Action
Turn on Connect with transmitter NA
Turn off
Does not connect with
transmitter
1.
Please wait for connecting
2.
Make sure the transmitter is
connecting power
3.
Bind the transmitter and receiver
again
4.
Connect the power again
[8]: Monitor the display device status
Light status Description Action
Turn on Display device connect well NA
Turn off
Display device does not
connect Check display device cable
position
[9]: Monitor mobile connect status
Light status Description Action
Turn on Mobile connect well NA
Turn off No mobile connect
Make sure the mobile connect
with the network, turn off the
software then turn on again.
5.2.3 Below cabin left side port
5.2.4.1
[1]: HDMI port, for connect with the monitor.
[2]: MAVLINK/USB port, for transmit mavlink data. Baud rate 57600, Fream: 0xFE.