R2TECK DVL-2, Руководство пользователя

Страница: 10 / 25

8
5. Port definition
5.1 Transmitter port
5.1.1 Back side
5.1.1.1
[1]: For frequency switch setting
Press the button more than 5 seconds, 4 lights (HDMI, LINK, OSD, WORK) are all turn-off,
release the key, 4 lights flash as 0.5Hz frequency, and then 4 lights back to normal state, that
means channel change is finished. If devices not connected yet after 10 seconds of frequency
switch process, please switch again. The frequency supported by device as below
：
5180 5220 5260 5320 5520 5540 5560
5580 560 5620 5640 5660 5680 5700
[2]: For bind the transmitter and receiver.
Press the button more than 5 seconds, 4 lights (HDMI, LINK, OSD, WORK) are all turn-off, then
4 lights flash one by one, when the LED light works well that means they are well bind. This may
takes 2 minutes. If the connection has not been resumed after 2 minutes, repower on both ends,
and don’t need rebind.
5.1.2 Right side port
5.1.2.1