R2 Stone Burier Attachment
TWT/R2SB/0617
Page 9
Preparing for Use
Before using the machine always perform the following checks with the power unit not running
(engine off):
Check the bolts are tight and that all the elements are in perfect condition.
Check that all the safety stickers are present and are legible.
Working depth adjustment
The working depth is adjusted by the rotating crank lever
on the roller (Figs. 7 & 8 A).
Lifting the roller (rotating the lever) enables the digging
knives to sink into the soil. The roller must be adjusted
so that during working, the machine sides are leaning or
inserted into the soil (the underneath side of the chain
guard, Figs. 7 & 8 B) touches the soil.
To transport the stone burier attached to the power
unit when it is not in use, rotate the adjustment rod
(maximum extent of leverage); in this way the the stone
burier will not touch the soil and the roller will function as
a wheel.
To avoid dangerous situations, it is necessary that during
digging the machine sides touch the soil.
Figure 7
Condor
Figure 8
Condor Light
