R2 Stone Burier Attachment
Page 14
TWT/R2SB/0617
End of Work & Storage of Stone Burier
If the stone burier is not going to be used for a long period, then prior to storage, follow the
instructions below:
1. Wash and dry the stone burier thoroughly. WARNING: Do not clean the double joint with
clutch with a polishing machine.
2. Check all the moving parts and replace any that are worn or damaged.
3. Check all the nuts and bolts are tight.
4. Check the oil level in the reduction gear and the grease level in the chain guard.
5. Protect and lubricate all the unpainted metal parts.
6. Cover the machine and keep it in a dry place.
IMPORTANT
: Before using the machine after a period of storage, refer to the ‘Maintenance’
section on page 12.
Always ensure the machine is stored safely and that any prominent parts are protected so as not
to cause injury.
Ensure that the storage location does not block emergency exits, fire extinguishers/hydrants,
first aid boxes, or any other escape routes or emergency areas.
If pressure washing the machine (water or air) prior to storage, ensure that there are no people
or animals in the working area and wear protective goggles and if necessary a dust mask.
