R.V.R. Elettronica TOUCH30S, Руководство пользователя

Страница: 23 / 38

TOUCH30S
19 / 34 User Manual Rev. 2.1 - 11/06/03
• Make sure that the rear part is ventilated adequately. If the internal temperature
of the RACK, where the transmitter is contained, is too much high (we
recommend that the temperature does not exceed the 40°C) make sure that
comes guaranteed the adequate ventilation.
• Not operate without the cover of the container. Moreover make sure that the
cover is placed and pushed until the end of the rabbet.
• Avoid that the voltage variations exceed the limits. The worse conditions take
place with lower power RF (p.e. 5W) and with higher mains voltage (p.e. 250V)
or viceversa.
• Not exceed the maximum power of 30W. The transmitter can increase of 10%
this power. Not allow that these limits are exceeds.
• Improved versions of the software will be prepared. Ask to your retailer
approximately the upgraded versions of our software or visit our web address.