R.V.R. Elettronica TLC300, Руководство пользователя

Страница: 17 / 103

TLC300
13 / 42 User Manual Rev. 1.0 - 07/04/03
5.1.2.3 Audio signal missing (PTX-LCD only)
The audio signal presence control is carried out only if the exciter of the transmitters
is a PTX-LCD series exciter comes, therefore, generated an alarm message that
comes memorizzato locally and comes subsequently sended through modem to the
numbers and in the modalities indicated from the carried out programming.
5.1.2.4 I
2
C bus alarms
The control on the presence of alarms comes made only in the case is present LCD
equipments comes therefore generated a message alarm that comes memorized
locally and comes subsequently sended through a modem to the numbers and in the
modalities indicated from the carried out programming.
5.1.2.5 Default codes
The codes of alarm of default are reassumed in the table.
CODE Indication Meant
000 Forward Power Forward power (analogic read)
001 Reflected Power Reflected power (analogic read)
≥
002
≤
011
General alarms adjustable from user
012 Reserved Reserved
013 No Audio Absence of audio signal
014 Mod Fault I2C module damage
015 Restart System restart
5.1.3 Alarms signalling
The TLC marks the malfunctioning situations in locally and in remote, sending a series
of messages with modalities that depend on the modalities indicated in the carried
out programming.
5.1.3.1 Local signalling
• If set up, it excites the relay 8 of the Additional card.
5.1.3.2 Remote signalling with telephone modem
• The TLC calls in sequence all the telephone numbers sets up to you and
communicates the code and alarm description (from the other part must be
connected a PC with the TELECON software in stand-by or a communication
program that attended messages from the modem).
• The TLC repeats the series of calls for others many times and for all the numbers
indicates to you in the carried out programming.