TEX150-LCD/S
12 / 24
User Manual
Rev. 1.0 - 09/07/04
By pressing and keeping pressed ENTER, you can change the set frequency with
the UP (frequency increases) and DOWN keys.
After having set the new frequency value, press ENTER to confirm your choice; the
exciter will unlock from the current frequency (the “LOCK” LED goes off) and will lock
on a new working frequency (“LOCK” goes on again). By pressing ESC or allowing
the timeout to elapse, the frequency will remain set on the previous value.
5.4.5 Mix menu (Mix)
This menu lets you set the machine address in an I
2
C type serial bus connection:
The address of the I
2
C line is important when the exciter is connected in an R.V.R.
transmitting system that uses this type of protocol. However, we recommend you not
change it for no reason.
5.4.6 Versions menu (Vrs)
This screen shows you the software version and release date.