R.V.R. Elettronica PJ5KPS, Руководство пользователя и техническое руководство

Страница: 78 / 168

PJ5KPS
72 / 80 User & Technical Manual Rev. 1.5 - 08/02/06
Click on the tab “General” and do the following settings (for example):
Station ID ID for addressing pourpouse. Write if you only have 1
Station Name Mnemonic name of the station, like place or frequency
Dial Sring Normally, ATDT
Number of Retry Number of messages to send. We suggest to set this value to at least 2, in
case of problems with the SMS Service Center.
Then click on Telephone and fill it with the telephone numbers that will be known to the
station. Yes or No in the SMS column specifies whether the number will receive a
SMS in case of alarms, while the column ACS determines the numbers entitled to
send commands via SMS to the station, avoiding interferences from unexperienced
operators.
Finally, specify the kind of modem the station shall send the alarm to, so that it will
determine whether to send a SMS or place a normal telephone call.
At this point, click on WRITE SETTINGS and then WRITE EEPROM: you will see the
blue progress bar indicating the software is loading into the TLC5KPS.