![background image](http://html1.mh-extra.com/html/r-v-r-elettronica/pj5kps/pj5kps_users-and-technical-manual_3098838026.webp)
PJ5KPS
20 / 80
User & Technical Manual
Rev. 1.5 - 08/02/06
5.3.3 Control unit settings
The settings of the control unit that are required for starting up the machine, mentioned
in the powering-on procedure, are the following:
1. Setting of the power levels
2. Setting of the on air exciter
Before performing the first operation, click the ESC button. The display shows the
screenful for selecting the menus [Figure 5-7]. Click the arrow keys until the cursor
highlights the line associated with the Setting menu. Click OK: the software will show
the associated screenful on the display [Figure 5-8].
On having accessed the Settings menu, use the arrow keys to select the nominal
power line (Pwr. Out) and click OK. Use the arrow keys to decrease or increase the
indicated percentage value up to the required level. Click OK again to set this value.
Repeat the operation for the line associated with the reduced power level (Pwr. Lower).
NB
The new power level is transmitted to the combiner module and then stored in
EEPROM only when the ESC button is clicked.
When inside this menu, it is advisable to check the date and time lines and update
them if necessary. Note: the date and time are used only for marking the events in the
alarms register.
NB
The date and time do not need to be updated in the transmitter in order for it to work
efficiently.
On having completed these settings, click ESC to return to the selection screenful.
In order to set the on air exciter, select the Exciters menu [Figure 5-9]. Take into
consideration the On Air Exciter line: the number to the right indicates the exciter
being used. To change it simply highlight the line and click OK.
Figure 5-8
Menù settings
Содержание PJ5KPS
