![background image](http://html1.mh-extra.com/html/r-v-r-elettronica/pj300m/pj300m_user-manual_3096808029.webp)
PJ300M
23 / 28
User Manual
Rev. 7.0 - 25/07/03
•
Disconnect the RF module connectors CN1, J1 and J2
•
Remove the air filter of the RF module from the front panel
•
Unscrew two screws securing the heat sink of the RF module to the front panel
•
Release the metal bar that holds the heatsink on the other end removing its screws
•
Carefully remove the amplifier module
9.3.4
Soft Start Card Replacement
•
With the help of the wiring diagram shown in Appendix, take the note of the
cable position.
•
Disconnect M1 and M2 connectors.
•
Disconnect M3.
•
Dismount the four securing screws and remove the board.
9.3.5
Alarms Card Replacement
•
Remove the knob of the meter selector loosening the screw inside the knob.
•
Dismount the nut of the alarms reset push-button.
•
Disconnect CN1 and CN3 alarms card’s connectors.
•
Disconnect CN2 telemetry card’s connector.
•
Remove the screws securing the board to the front panel.
•
Carefully extract the card.
Содержание PJ300M
