R.V.R. Elettronica PJ20KPS-C, Руководство пользователя и техническое руководство

Страница: 107 / 114

ELETTRONICA
Rev. 1.2 23/07/2012
101
User & Technical Manual
PJ20KPS-C/PJ25KPS-C
From this screen you can also reset the alarms.
Clicking on the “Remote Reset Alarms” resets the alarms stored in the telemetry.
You will be asked the following question, answer “Yes”.
Clicking on the “Reset Alarms Database” deletes the alarm list on this screen the program.
You will be asked the following question, answer “Yes”.
Click on the “Return” at the bottom to return to the main screen.
Press the “Exit” to return to the selection of the type of transmitter.
Then disconnect the RS-232 cable by the telemetry, and reconnect the bridge MODEM -
RS-232. Now you can connect remotely to the transmitter, using a GSM modem connected
to your PC, or via phone to verify that everything works correctly.
Press the “Exit” to exit permanently from the program.
Leave the transmitter in “REMOTE” if you do get warning messages or be able to
connect remotely via PC or mobile phone