R.V.R. Elettronica SpA TLC2000, Руководство пользователя

Страница: 15 / 128

TLC2000
11 / 50 User Manual Rev. 1.0 - 05/05/03
5. Quick reference
The purpose of this chapter is to summarize the points that should be adhered to for
using the machines. Should any point not be fully comprehensible, such as how to
operate the machine the first time, the description of the operating system should be
read very carefully.
5.1 Using the encoder
The interaction between the user and the control software of the device takes place
by means of the encoder.
The following operations are performed on the encoder:
• turning: to move the cursor up or down on the display; turn the encoder to the left
to move the cursor down, to the right to move the cursor up. Also used for increasing
or decreasing the selected parameters (to the left to decrease the value, to the
right to increase it) and for selecting an item from a list of options
• pressing: press the button once when the cursor is pointing to the name of a
menu to access that menu, press the button when the cursor is pointing to a
parameter to access the change mode (the cursor begins to blink). After having
changed a parameter, press the button to store the new value.
After having changed a parameter, the cursor keeps blinking for about thirty seconds
waiting for confirmation. If the user does not confirm the change, the machine emits a
sound to warn the user that the change was not confirmed. As such, the cursor stops
blinking and points to the selected parameter.
Ruotare l’encoder verso sini-
stra per spostare il cursore ver-
so il basso, per decrementare
il valore di un parametro o per
selezionare un elemento di una Ruotare l’encoder verso destra
per spostare il cursore verso
l’alto, per incrementare il valo-
re di un parametro o per sele-
zionare un elemento di una li
Premere il pulsante una volta per entrare
nel menù desiderato, quindi una seconda
volta per modificare il parametro selezio