R.V.R. Electronica RX1-NV LCD, Руководство пользователя

Страница: 13 / 132

RX1-NV LCD
9 / 32
USER MANUAL Rev. 1.2 - 13/12/01
5. Quick Start
This chapter gives a concise view of the points that are necessary for the installation
of the device. If any item is not completely clear, for example when you use the
receiver for the first time, we strongly suggest to read throughly the manual and
the description of the operating system.
5.1 Using the encoder
The interaction between the user and the receiver’s control software is performed
using the encoder (fig. 5.1).
Figure 5-1
The operations supported by the encoder are:
• rotation: moves the cursor shown on the display; if you turn the encoder to the
left (counterclockwise), the cursor moves downwards, if you turn it right the
cursor moves upwards; it also permits to increase or diminish the parameters
(turning the encoder left diminishes the parameter, turning it right increases it)
or to select an item form a list of options
• pushing: push the button once when the cursor is on the name of a menu to
enter in that menu, push it when the corsor is on the name of a parameter to
enter in modification mod (the cursor starts blinking); after the modification of
a parameter, push the button to save the new value.
After having modified the value of a parameter, the cursor goes on blinking for
approximately 30 seconds, waiting for confirmation from the user. If the user
doesn’t confirm the new value (i.e., the button is not pressed), the device emits
a sound to indicate that no modification has been saved; the cursor stops
blinking and remains on the selected parameter.
Turn the encoder counterclockwise
to move the cursor downwards, to
decrease the value of a parameter
or to choose an element from a list
of possibilities Turn the encoder clockwise to
move the cursor upwards, to
increase the value of a parameter
or to choose an element from a list
of possibilities
Push the button once to enter in the desired
menu, to enter in modification mode or to
confirm a choice