30
∙
Automatic Shutdown:
Type the desired value for dBm, seconds, and times
and then Click
APPLY
and
ON
.
[Example]
A repeater with 23dBm Maximum Output Power, 80dB Maximum Gain/35dB gain control
range, assuming
ASD Level: 25dBm, ASD Time, ASD Count
are already fixed at
3seconds, 10times.
If the composite output power is 25dBm(ASD Level) and higher, the repeater will
shutdown for 3seconds(ASD Time). If the shutdown occurs 10times(ASD Count),
the 11th shutdown will be permanent.
The repeater automatically runs Easy Setup. After that, it is activated with the
re-calculated antenna isolation value.
Содержание RSN-WiMAX-23 H
