R-Tech PLASMA 40HF, Руководство по эксплуатации

Страница: 4 / 19

4
Introduction
The R-Tech Plasma 40HF is a member of our field acclaimed family of welding products.
Premium features include:
-
1. Inverter power source – more efficient to operate, provides smoother weld
characteristics.
2. Infinite cutting power adjustment, allows fine tuning of cut characteristics
3. HF Pilot start – Enables easy arc start even on painted surfaces
4. HF pilot arc restart – ideal for cutting mesh etc
5. Digital
amp meters
6. Quick fitting torch for easy torch fitment/replacement
7. Long life – Low cost torch consumables
8. 60% Duty cycle at 40 Amps @ 40
º
C
Recommended Processes
The R-Tech Plasma 40HF is recommended for the plasma cutting processes within its output
capacity of 40 Amps DC
Equipment Limitations
The R-Tech Plasma 40HF is protected from overloads beyond the output ratings and duty cycle
as per machine specifications with thermostat protection of the output coils and rectifiers.
Cutting Capability – Duty Cycle
The R-Tech Plasma 40HF is rated at 40 Amps at 60% duty cycle on a ten minute basis. If the
duty cycle is exceeded a thermal protector will shut machine off until the machine cools.
Technical Specifications
MODEL
PLASMA 40HF
Power Voltage
220/240V 50/60Hz
Input Current 28A
Rated Output Current 40A
Current Adjusting Range 20-40A
No-load Voltage 200V
Rated Duty Cycle 60%
Working Mode HF Start
Air Pressure 50 PSI
Max. Cutting Thickness (Clean cut mild steel) 12mm
Max. Cutting Thickness (Severance cut mild steel) 16mm
After Flow Time 10 Seconds
Dimensions 390 X 190 X 290