12
Connections for TIG (GTAW) Welding
Fig 3
1)
Gas outlet
Connect the TIG torch gas hose quick release connector
2)
MIG Torch Euro Connector (NOT used in TIG mode)
3)
Positive power con
Connect the earth lead to by inserting and twisting until tight and the earth clamp to work/ bench
4)
Torch switch / Foot pedal socket
Connect TIG torch control plug or Remote Foot Pedal plug
5)
Negative power connector -
Connect TIG Torch Dinse to power connector by inserting and twisting until tight
Connect the gas input hose to gas regulator and use 'Pure Argon' Gas, available from local suppliers. Set gas
flow/pressure to 8 LPM, make sure the gas bottle is secured to avoid injury.
