7
The PLASMA 50CNC Plasma Cutters require a 240V 50/60Hz 1-Phase supply. It requires a 32A fused supply. It comes
with a mains cable attached. Connect wires according to national coding.
Brown wire Live
Blue wire Neutral
Green/Yellow Wire Earth (Ground)
Connecting to a mains electrical supply
THIS MACHINE IS OF AN INDUSTRIAL SPECIFICATION AND MUST BEFITTED TO A
32AMP 240V MAINS INPUT - DO NOT RUN ON 13AMP PLUG
–
FAILURE TO RUN ON
CORRECT SUPPLY WILL IN-VALIDATE WARRANTY
Connecting to an Engine Driven Generator
If connecting this Plasma Cutter to an engine driven generator please ensure the
following
Minimum Generator KVA Output 12KVA continuous
Generator to be fitted with AVR (automatic voltage regulation)
DO NOT USE ON A GENERATOR WITHOUT AVR
Connecting to a generator without the above minimum requirements will
invalidate your warranty.
