background image

STEP 4

Turn the battery compartment over to 
observe the five screws holding the 
protective cover in place.  Extract these 
screws and remove the cover to expose 
the rechargeable batteries underneath.

Page 4

STEP 5

With the cover removed you may now replace the batteries.  
TIP: After installing the new batteries, and before re-
assembling the solar unit, it is a good idea to take the 
entire solar unit to a dark room to insure the solar unit is in 
proper working order and the batteries have a solid 
connection.  When the LED's light-up you have successfully 
replaced your batteries. 
 Reverse steps 1 - 4 to re-assemble 
your buoys solar generator.  

STEP 3

Upon removing the three mounting screws, pull 
the battery compartment away from the solar 
generator cover.  Use care when pulling or 
prying the compartment away from the cover, 
as to not damage the exposed LED's or external 
wiring.

CHANGING BATTERIES (Cont.)

ATTENTION:  If you live in a region where the outside temperature reaches a sustained 35 degrees in the 

winter months, we recommend that you remove the Aqua Lantern from the lake and store it in a warm dry 

place until spring.  For additional information, visit "www.aqualantern.com"

Содержание AQUA LANTERN

Страница 1: ... are included and have been installed at the factory STEP 2 Locate the four threaded holes on the bottom of the buoy Using a Flathead screwdriver attach the flanged anchor bracket to the bottom of the buoy using the screws provided CAUTION Do Not Over Tighten Mounting Screws Page 1 58 Chesterfield Drive Noblesville Indiana 46060 www aqualantern com R R Forrest Company ...

Страница 2: ...pose the magnet Touch your screwdriver to the magnet and pull the magnet out to remove it This operation will activate the batteries for charging and normal operation You may dispose of the magnet and protective cover CONGRATULATIONS NOW YOU CAN LIGHT UP THE LAKE YOUR AQUA LANTERN IS READY FOR USE STEP 4 Use proper hardware and tethering equipment for safe anchoring of your Aqua Lantern ATTENTION ...

Страница 3: ...e solar compartment Do not lose this seal ring and always make sure it is in place before threading the lid back on STEP 2 Using a Phillips screwdriver remove the three small screws holding the battery compartment to the solar generator cover Be careful not to damage the exposed LED s or electronics CHANGING BATTERIES Uses 4 AA 1 2V Ni Mh Nickel Metal hydride rechargeable batteries Ensure replacem...

Страница 4: ...e a solid connection When the LED s light up you have successfully replaced your batteries Reverse steps 1 4 to re assemble your buoys solar generator STEP 3 Upon removing the three mounting screws pull the battery compartment away from the solar generator cover Use care when pulling or prying the compartment away from the cover as to not damage the exposed LED s or external wiring CHANGING BATTER...

Отзывы: