background image

Page 3

STEP 1

At least every two years you will need to replace 
your rechargeable batteries in the buoy's solar 
generator.*      To replace the batteries, you will first 
need to remove the solar generator assembly by 
turning it counter-clockwise from the buoy 
enclosure.   For easy removal, use the supplied 
spanner wrench by aligning with radial grooves in 
lid as shown.  CAUTION:  A rubber seal ring on the 
threaded lid prevents moisture from penetrating 
the solar compartment.  Do not lose this seal ring 
and always make sure it is in place before 
threading the lid back on.

STEP 2

Using a Phillips screwdriver, remove the three 
small screws holding the battery compartment 
to  the  solar generator cover.   Be careful not to 
damage the exposed LED's or  electronics.

CHANGING BATTERIES

Uses (4) AA, 1.2V, Ni-Mh (Nickel-Metal hydride) rechargeable batteries.  Ensure replacement 

batteries (not included) are fully charged prior to installation.  Always follow battery 

manufacturer's instructions to insure the longest life of your store brand batteries.

* ATTENTION:  battery life will vary based on use and 
operating conditions

Содержание AQUA LANTERN

Страница 1: ... are included and have been installed at the factory STEP 2 Locate the four threaded holes on the bottom of the buoy Using a Flathead screwdriver attach the flanged anchor bracket to the bottom of the buoy using the screws provided CAUTION Do Not Over Tighten Mounting Screws Page 1 58 Chesterfield Drive Noblesville Indiana 46060 www aqualantern com R R Forrest Company ...

Страница 2: ...pose the magnet Touch your screwdriver to the magnet and pull the magnet out to remove it This operation will activate the batteries for charging and normal operation You may dispose of the magnet and protective cover CONGRATULATIONS NOW YOU CAN LIGHT UP THE LAKE YOUR AQUA LANTERN IS READY FOR USE STEP 4 Use proper hardware and tethering equipment for safe anchoring of your Aqua Lantern ATTENTION ...

Страница 3: ...e solar compartment Do not lose this seal ring and always make sure it is in place before threading the lid back on STEP 2 Using a Phillips screwdriver remove the three small screws holding the battery compartment to the solar generator cover Be careful not to damage the exposed LED s or electronics CHANGING BATTERIES Uses 4 AA 1 2V Ni Mh Nickel Metal hydride rechargeable batteries Ensure replacem...

Страница 4: ...e a solid connection When the LED s light up you have successfully replaced your batteries Reverse steps 1 4 to re assemble your buoys solar generator STEP 3 Upon removing the three mounting screws pull the battery compartment away from the solar generator cover Use care when pulling or prying the compartment away from the cover as to not damage the exposed LED s or external wiring CHANGING BATTER...

Отзывы:

Похожие инструкции для AQUA LANTERN