Version 02.10.2019
HW CAM(V98)/(V12)
RL4-R40-E
P
a
g
e
11
2.5.
Analog power supply
If the communication between the CAN box and the vehicle’s CAN bus does not
succeed (not all vehicles are compatible), an analogue connection is required.
Connect the female 12pin connector of the 12pin interface cable to the male 12pin
connector of the video interface.
Connect the 12pin interface cable’s purple coloured wire
Manual ACC
to +12V
Ignition
power
or to +12V
S-contact
terminal 86s +12V
(e.g. glove compartment illumination).
