R/Evolution R/Evolution 2730, Руководство по началу работы

Страница: 25 / 70

Chapter 2 Installing and Cabling Enclosures 25
Unpacking an Enclosure and Verifying its Contents
This section provides a list of contents in an enclosure package.
Caution – Two people are needed to lift and move the enclosure. Use care to avoid
injury. An enclosure with all drives installed can weigh 65 pounds (29.5 kilograms).
1. Unpack the enclosure.
2. Check the contents of the enclosure and box for the items listed in Table 2-1.
Table 2-1 Contents of an Enclosure Package
Item Quantity
Enclosure ordered
1
; either:
• R/Evolution 2730 FC Controller Enclosure
• R/Evolution SAS Expansion Enclosure
1 The enclosure includes 1 or 2 controller or expansion modules, as ordered.
1 or 2
6-foot (1.83 m) power cord 2 per enclosure
Controller enclosure only:
• SFP transceivers 1 per host port
• 16.4-foot (5 m) shielded CAT-5 Ethernet crossover
cable
1 with second controller
module
• 6-foot (1.83 m) serial cable, RS-232 micro-DB9 1 per controller module
Drive enclosure only:
• 1.9-foot (0.6 m) SAS-to-SAS cascading cable
2
2 You may need to order additional or longer cables if you are cabling a fault-tolerant configuration.
1 per expansion module
Purchased options. These options are ordered at the time
of purchase and are integrated into or added to the
system prior to delivery. Various