14
RIDA qLine® Orbital Shaker | User Manual
4 Uninstalling and disposal
Due to its properties and possible applications, the device needs to be handled properly.
Follow the instructions below for handling the device:
4.1 Uninstalling the device
When uninstalling/removing the device and its components, follow the steps below:
1. First, switch off the RIDA qLine® Orbital Shaker using the power switch.
2. Disconnect the power cord from the power supply.
3. Now you can remove the shaker and its components from the work area.
4.2 Disposal of reagents and materials
Users are responsible for the proper disposal of all reagents and materials after use. Users
are responsible for the proper disposal of instruments at the end of the life cycle. For
disposal, please adhere to national regulations.
4.3 Device disposal
Waste Electrical and Electronic Equipment (WEEE) Directive
of the European Union (EU).
Damaged and/or defective electrical and electronic equipment must be taken to recycling
