RIDA qLine
®
Orbital Shaker
12
15.11.2015
Note:
These instructions don’t cover all safety risks that may result from using the device or from
chemicals, reagents, devices and equipment that are used in a specific test or process. It is the
users responsibility to get advice and stipulate the correct health and safety regulations or
practices and also the use or limitations of this device before using it.
Note:
Failure to follow the safety and operation instructions in this manual and all incorrect handling
of the device, can impair the foreseen protection of the device as well as void the warranty!
Caution:
Only instructed users may start the device.
Caution:
Don’t use this device in dangerous surroundings and especially not in explosive ones.
Caution:
The main switch of the control box does not fully disconnect the device from the power source.
Only one phase is separated. Please pull out the mains plug to disconnect the device
completely from the mains/ power supply.
Note:
Make sure that all safety instructions of the device or on the device can be clearly seen during
operation.
Caution:
Don’t open the device. Repairs are only to be carried out by trained service technicians.
Caution:
Don’t use flammable media together with or in the direct surroundings of the device.
2 Operation and description of the RIDA qLine
®
Orbital Shaker
2.1 Description
The RIDA qLine
®
Orbital Shaker is a shaking device with an orbital shaking movement. The device will be
powered on and off by switching the power-button located at the front side of the housing. The shaking
frequency is 300 rpm and cannot be changed by the user.
