R. Beck Maschinenbau HS 300 MIDI, Руководство по эксплуатации

Страница: 6 / 36

6
BA_BM_HS-300-MIDI_EN_44-21.docx
3 General
The operating manual must be read carefully and understood before handling the
lift table! If anything is unclear, please contact the manufacturer.
In contrast to the standard model, the ergonomic scissor lift table HS 300 MIDI is equipped with a larger support
frame for even larger table tops. The solid construction of square profiles and its mobility thanks to four swivel
castors make it an indispensable assistant for countless applications in industry and trade, e.g. for maintenance,
assembly and repair work.
Attachable and screwable optional table tops allow individual adaptation to different applications.
3.1 Advantages
•
Back-friendly hydraulic height adjustment by foot (HS 300 MIDI | FH) or battery (HS 300 MIDI | AH)
•
Lifting scissors made of square profiles with reinforced bolting throughout for maximum stability
•
The scissor principle ensures a high lifting capacity of max. 300 kg (FH) or 350 kg (AH)
•
Mobility thanks to four swivel castors ensures flexible and versatile use
•
Uniform adjustment to height, even under uneven load distribution
•
Individual application areas can be realised with different table tops
•
High-quality, side-mounted hydraulic unit
3.2 Applications
The lift table can be used for all work corresponding to its intended use in section

4.2. It is suitable for use as
work equipment for transporting, lifting and lowering loads as well as a height-adjustable assembly table. Typical
areas of application are workplaces in manufacturing, assembly and maintenance, where precise height adjust-
ment for ergonomic working as well as high flexibility and mobility are of particular importance.
The lift table must not be used for work that does not correspond to its intended use (see section

4.2).
3.3 Target Group and Previous Experience
This operating manual is intended for the operating and maintenance personnel of the lift table. The operating
personnel is to be determined by the operator and must further meet the following requirements:
•
Basic technical and mechanical knowledge as well as knowledge of the associated technical terms
•
Reading and understanding these operating and maintenance instructions
In order to acquire the knowledge required to operate this lift table, the operator must ensure the following
measures:
•
Product training for every operator (also possible external personnel)
•
Regular safety instruction
3.4 Requirements for the Operators
The operator is responsible for the safe use of the lift table!
The lift table may only be operated by trained personnel who have also read this manual.
Inspection, maintenance, cleaning and repair may only be performed by technical specialists
with product-specific training and mechanical and/or electrical training.
Specialists with product-specific training are to be commissioned and held responsible for
planning and checking the work.
The national protective regulations for employees must be observed
The legal minimum age must be observed.