R. Beck Maschinenbau HS 1000 FH, Руководство по эксплуатации

Страница: 9 / 31

9
BA_BM_HS-1000_EN-45-21.docx
4.4 Consequences in Case of Disregard
If the lift table is not operated, maintained or repaired in accordance with the safety regulations, not as in-
tended, improperly or in an abusive manner, the following will result:
Dangers to the health of the operating personnel
Dangers to the lift table and objects in its vicinity
Impairment of the lift table function
In case of improper use of the lift table, any warranty, liability and other claims for damages of the operator
against the manufacturer are excluded!
4.5 Conversions and Modifications of the Lift Table
Only use the lift table in its original condition, i.e. as delivered!
The components of the lift table must not be changed in their type and condition.
Only original spare parts and accessories from the manufacturer (see

16) may be used.
Deviations are not permitted.

Unauthorized modifications or conversions by the operator, without the written consent of
the manufacturer, are prohibited. This excludes any warranty, liability and other claims for
damages by the operator against the manufacturer!
4.6 Load Distribution and Influence on the Nominal Load
The nominal, maximum permissible load of 1000 kg is based on a load evenly distributed on the lift table plat-
form. If the load cannot be distributed evenly on the platform, the maximum permissible load must be reduced
according to the figures below.
Figure 1: Permissible load with load distribution
Even distribution
Load is evenly distributed
over the entire platform area
→
100 % of the nominal load
is permissible.
Uneven distribution
Load is distributed over half of the
platform in transverse direction
→
50 % of the nominal load
is permissible.
Uneven distribution
Load is distributed over half of the
platform in longitudinal direction
→
33 % of the nominal load
is permissible.
max. 100 % max. 50 % max. 33 %