R. Beck Maschinenbau HS 1000 FH, Руководство по эксплуатации

Страница: 6 / 31

6
BA_BM_HS-1000_EN-45-21.docx
3 General
The operating manual must be read carefully and understood before handling the
lift table! If anything is unclear, please contact the manufacturer.
The ergonomic HS 1000 scissor lift table has a very high load capacity of max. 1000 kg and is therefore particularly
suitable for heavy-duty applications. The solid construction of square profiles and its mobility thanks to four
swivel castors make it an indispensable assistant for countless applications in industry and trade, e.g. for mainte-
nance, assembly and repair work.
The standard variant has a 5 mm thick metal sheet table top (1600 x 900 mm). Optionally, a 30 mm thick beech
multiplex table top with the dimensions (1700 x 1000 mm) is available.
3.1 Advantages
•
Back-friendly hydraulic height adjustment by foot (HS 1000 | FH) or battery (HS 1000 | AH)
•
The sturdy single scissor design offers a long service life even under heavy loads
•
Mobility due to two swivel castors with brake and two fixed castors
•
Individual application areas can be realised with different table tops
•
Uniform adjustment to height, even under uneven load distribution
•
Suitable for heavy duty applications up to a maximum of 1000 kg
•
High-quality, side-mounted hydraulic unit
3.2 Applications
The lift table can be used for all work corresponding to its intended use in section

4.2. It is suitable for use as
work equipment for transporting, lifting and lowering loads as well as a height-adjustable assembly table. Typical
areas of application are workplaces in manufacturing, assembly and maintenance, where precise height adjust-
ment for ergonomic working as well as high flexibility and mobility are of particular importance.
The lift table must not be used for work that does not correspond to its intended use (see section

4.2).
3.3 Target Group and Previous Experience
This operating manual is intended for the operating and maintenance personnel of the lift table. The operating
personnel is to be determined by the operator and must further meet the following requirements:
•
Basic technical and mechanical knowledge as well as knowledge of the associated technical terms
•
Reading and understanding these operating and maintenance instructions
In order to acquire the knowledge required to operate this lift table, the operator must ensure the following
measures:
•
Product training for every operator (also possible external personnel)
•
Regular safety instruction
3.4 Requirements for the Operators
The operator is responsible for the safe use of the lift table!
The lift table may only be operated by trained personnel who have also read this manual.
Inspection, maintenance, cleaning and repair may only be performed by technical specialists
with product-specific training and mechanical and/or electrical training.
Specialists with product-specific training are to be commissioned and held responsible for
planning and checking the work.
The national protective regulations for employees must be observed
The legal minimum age must be observed.