R. Beck Maschinenbau 193.500.00, Руководство по эксплуатации

Страница: 4 / 31

4
BA_BM_HS-1000_EN-45-21.docx
1 Introduction
The information in this operating manual enables safe, proper and economical operation of your lift table. Please
observe all the explanations, notes and regulations
•
to avoid dangers and malfunctions,
•
to reduce repair costs and downtimes
•
and to increase reliability and service life
of your lift table.
The operating manual must be read and used by each person entrusted with carrying out work with the lift table.
This must be ensured by the operator. Further this manual as well as any appendices and additional documents
must be kept easily accessible at the place of use of the lift table.
Ignorance or non-observance of these operating instructions may result in certain accident
hazards during handling with the lift table. Before commissioning, this operating manual
and any appendices and additional documents must be read thoroughly. All instructions, in
particular the safety regulations, must be observed!
Handling the lift table in the sense of these instructions means
• the installation and commissioning,
• the operation and proper usage,
• the influence on operating conditions, as well as
• the maintenance, troubleshooting and repair.
Apart from the operating manual and the legally binding accident prevention provisions applicable in the country
and place of use, the recognized technical regulations for safe and proper work must also be observed.
1.1 Legal Notice
All contents of these operating instructions are subject to the rights of use and copyright of Reinhold Beck Mas-
chinenbau GmbH. Any reproduction, modification, further use and publication in other electronic or printed me-
dia, as well as their online publication, requires the prior written consent of Reinhold Beck Maschinenbau GmbH.
1.2 Illustrations
All photos, figures and graphics contained in this document are for illustration and better understanding only
and may differ from the current state of the product.
2 Symbols
2.1 General Symbols
Symbol Meaning

Indicates passages within this operating manual that must be particularly observed in order to
prevent malfunctions or damage to the lift table.

Refers to chapters, sections, or figures within this document.

Refers to an external document or a third-party source.