Page 2 of 3
Questions? We’re here to help!
QZ is registered trademark of Yugadi Electronics. All rights reserved.
All other trademarks are the property of their respective owners.
Features
Supports all 2.5”/3.5” SATA I, II, III HDD/SSD/Hybrid drives of any capacity
Support SATA III (6Gbps) / SATA II (3Gbps) / SATA I (1.5Gbps)
Incorporated with ASMedia ASM1153E chipset for best performance and wider compatibility.
UASP (USB Attached SCSI Protocol) support for even faster drive data transfer performance, up
to 20%, (UASP requires UASP capable host controller and OS).
Easy installation, no tools or drivers required
Power button for powering off drive when not in use. Drive sleeps automatically on OS power
events or 10 minutes of idle.
LED indicates power status and data activity
SuperSpeed USB 3.1 support data transfer rates up to 5 Gbps (actual rate depend on drive
specifications and computer USB host controller)
Backward compatible with USB 2.0, USB 1.1 at their native speed
Plug and play, supports hot swap
Installation Guide
Slide drives gently along the top of docking station bay, with SATA connectors aligned. Do not exert
force. Drives will attach and seat into the SATA connector with the drive centered in the dock, cradled
with space for airflow on both edges, so no fan is required. Drives are easily removed and reinserted
with no cables or connectors to attach.
Note
The following Seagate SATA drive models may require a firmware upgrade, downloadable from the
Seagate official site, before use: ST3000DM001/9YN166/3TB ST2500DM001/9YN16L/2.5TB
ST2000DM001/9YN164/2TB ST1000DM003/9YN162/1TB ST500DM005
FAQs
Why my drive gets hot during use?
It is normal for drives to become hot (50
⁰C)
during use.
Why am I experiencing slower data transfer rate than 5Gbps?
The USB 3.1 transfer rate is 5Gbps. Several variables could affect the USB transfer rate - drive
specifications and computer USB host controller.