Qwic D9.1, Руководство пользователя

Страница: 23 / 28

21
QWIC Electric Bicycle Manual
12.5 Inspection QWIC dealer check-up
You can take a general inspection to the (new) electric bicycle along with the
following bullet points:
* Are there any visible damages?
* Is the bicycle properly secured on the stand?
* Does the bicycle make odd noises when driving?
* Is the seatpost greased? (with vaseline)
* Is the steer stam greased? (with vaseline)
* Is there any slack in the bearings on the front fork?
* Are all bolts and nuts provided with white tectyl?
* Are the tires greased with vaseline?
* Does the lock run smoothly?
* Does the stand works smoothly?
* How does the bell sound? Is it mounted at the right position?
* Are both the pedals greased and mounted properly?
When some points are not taken care of properly, please contact your QWIC dealer.
12.6 Maintenance Service
QWIC advises you to submit your electric bicycle to a mayor overhaul at least once
a year. The first maintenance visit is recommended after 250 km or after 3 months
from purchasing. Additional servicing would be advised when necessary. For
example before the cycling season starts.
* Check the rims, spokes, tension and grip of the tires
* Tighten all mounting parts / bolts if necessary.
* Check the brakes for wear and tear, adjust the cable tension and check the brake
function.
* Check the headset for slack, check the steer stam and adjust when needed
* Lubricate and assembly the chain to the right tension.
* Full electrical system: Fully charge the battery, clean the motion sensor with
lukewarm water, use contact spray for any contacs, grease the battery terminals and
battery rails with vaseline and check the complete drive train for any malfunction.
* Derailleur: Make sure all the gears run smoothly.Adjust when needed.