Registration
The15-digit . base .
I D . c o d e . m a y .
contain . numbers .
a n d . c h a r a c t e r s , .
including . 0 . through .
9 . and . * . Make . sure .
you . carefully . and .
correctly .enter .all .15 .
digits
Your .
80
.is .an .
accessory handset ONLY
, .and .requires .a .
87
base .unit .to .operate
Where .
X
.is .the .new .handset .number .assigned, .sequentially, .by .the .base .If .you .do .not . .enter .the .
correct .digit .sequence, .you .will .hear .an .error .tone .Press .
MUTE/DELETE
.to .backspace .to .erase .a .
character(s) .and .carefully .re-enter .the .base .ID .code
Re-register existing handsets to a new base
1 . Install .your .new .base .unit, .the .handset(s) .will .display .
SEARCHING…
, .press .and .hold .the
.
MENU/SELECT
button .for .two .seconds
2 . The .handset .will .display:
3 . Follow .steps .2 .through .6 .in .
Registration
.above
De-register all system handsets
1 . . .With .the .phone .in .idle .mode, .press .
*88#
.on .base
###############
•
1 . After .charging .the .battery, .the .screen .will .display:
2 . On . the . base . unit, . press .
MENU/SEL
, . then . scroll . to .
DISPLAY
BASE ID
.Press .
MENU/SEL
, .the .15 .digit .base .ID .number .will .
display
3 . Enter .the .15 .digit .base .ID .code, .if .you .make .a .mistake, .press .
the .
MUTE/DELETE
.key .to .backspace .(delete .characters), .then .
enter .the .correct .information
4 .Press .
MENU/SELECT
.to .complete .the .registration .process
5 .Once .a .valid .base .ID .code .has .been .entered, .the .display .will .
blank .for .a .second .or .two, .and .then .show:
6 . If .the .base .accepts .the .new .handset, .after .several
. seconds .the .new .handset .will .show:
