Qware QW TB-1040, Руководство пользователя

Страница: 40 / 42

18. Firmware upgrade :
Android upgrade process will format the internal flash memory. So please
make sure to backup your data before upgrading the firmware.
Please go to our website http://www.qware.info/ and download the correct
firmware file.
The procedure is including 3 main steps :
Step 1) System upgrade :
1/ Please find the “01 System upgrade” file and it includes 7 files (aml_logo, logo,
u-boot-512M-UartB.bin, uImage, uImage_recovery, update.zip,
factory_update_param.aml).
2/ Unzip the firmware file and copy all 7 files (including a zipped “update” file) inside
a micro SD/TF card.
3/ Power the device off.
4/ Put the micro SD/TF card inside the slot of the device.
5/ Press and hold both “Power” and “Return” buttons to start upgrading.
6/ Release all buttons after reading “upgrading….please wait” which shows on the
screen.
7/ Then upgrade process will start automatically and will finish until get into main
menu.
NOTE :
- Please DO NOT power off the device until upgrading process finished.
- Please press “RESET” button if upgrading has not yet started and then repeat the
procedure steps 1 to 6.
Step 2) APK upgrade :
1/ After finished System upgrade completely, please go to Step 2) APK upgrade.
2/ Please find the “02 APK upgrade” file and it includes 2 files (update.zip and
factory_update_param.aml).
3/ Format the Micro-SD/TF card and copy all 2 files inside the Micro SD/TF card.
4/ Power the device off.
5/ Put the micro SD/TF card inside the slot of the device.
6/ Press and hold both “Power” and “Return” buttons to start upgrading.
7/ Release all buttons after reading “upgrading….please wait” which shows on the
screen.
8/ Then upgrade process will start automatically and will finish until get into main
menu.
NOTE :
- Please DO NOT power off the device until upgrading process finished.