Qvis ZEUS LITE LX 16 Ch Скачать руководство пользователя страница 50

Страница: 50 / 54

21).

The storage time is not enough.

Possible reasons are as followed:

1 Front vidicon quality is bad. The lens is too dirty. The vidicon is in back

lighting installation.

2 The hard disk capability is not enough.

3 The hard disk is damaged.

22).

The downloading files can not play.

Possible reasons are as followed:

1 There is no media player.

2 There is no DX8.1 software or higher edition.

3 There is no DivX503Bundle.exe file to play AVI video files.

4 The DivX503Bundle.exe and ffdshow-2004 1012 .exe files must be

installed in the windows xp system.

23).

I can not remember the advanced code or network code in the local

menu operation.

Please contact the local service or call the HQ service. We will offer

the service according the machine type and the program edition.

24).

Under win7 system, IE control can not be automatically download

and installation

A: may cause:

1 Manual install IE plug-in, not as administrator identity installation, lead

to installation does not completely or invalid. The right mouse button

click need to install the control, and then select installation as an

administrator

2 Automatic download control of time is intercept system; Can the

computer on the following operation: "start"--" run "input" msconfig 'and

then select "tools"--" change the UAC Settings "set for "never notice"

3 Control is antivirus software intercept, when installation can shut off

the anti-virus software, and then install, after the success of the

installation to put us set to trust the control software.

25).

Under win7 system, CMS installation failure, or after installation,

cannot open CMS software control is antivirus software intercept,

when installation can shut off the anti-virus software, and then

install, after the success of the installation to put us set to trust the

control software.

A: may cause:

1 Not as administrator identity installation, lead to installation does not

completely or invalid.

Содержание ZEUS LITE LX 16 Ch























































Результаты поиска

Содержание ZEUS LITE LX 16 Ch

Отзывы:

Похожие инструкции для ZEUS LITE LX 16 Ch

Бренды по названию

Популярные бренды

Qvis ZEUS LITE LX 16 Ch, Руководство пользователя

Результаты поиска

Содержание ZEUS LITE LX 16 Ch

Отзывы:

Похожие инструкции для ZEUS LITE LX 16 Ch

Бренды по названию

Популярные бренды