© Copyright QVIS Home ®. All documentation rights reserved.
6
Double Click is used to:
Play video.
Make selected camera full screen or to exit full screen mode.
Scrolling wheel is used to:
Control the zoom function of the PTZ cameras.
Mouse Drag can be used to select:
Area for facial detection.
Areas to block (for motion detection).
Select zooming function of PTZ control.
1.7 On-screen keyboard
The onscreen keyboard is operated via the mouse’s left click. To enter passwords,
usernames, values, etc.
Shift = Caps on/Caps off
Left pointing arrow = Left/delete
̺ = Space between characters
1.8 Power On/Off
1.8.1 Power On
Install the DVR correctly (as above) and then connect the power. The DVR LED should
light up light up and the DVR will boot automatically.
The DVR will then automatically detect any connected hardware (cameras, monitors,
etc.), this process should last about 20 Seconds. When this process has been
completed the DVR will enter the multi-screen real-time surveillance mode.
If your hard drive is not properly connected, the following message will appear on your
screen.
