Qvis APOIP-BL, Руководство пользователя, Страница: 29 / 44

© Copyright Qvis ®. All documentation rights reserved.
23
Please refer to the following figure for alarm input information (See Figure 2-6).
Alarm input : When the input signal is idle or grounded, the device can collect the different statuses from
the alarm input port. When the input signal is connected to the 5V power or is idle, the device collects the
logic
‘1’. When the input signal is grounded, the device collects the logic “0”.
Figure 2-6 Alarm input
Please refer to the following figure for alarm output information (See Figure 2-7).
Port ALARM_COM and Port ALARM_NO composes an on-off button to provide the alarm output.
If the type is NO, this button is normally open. The button becomes on when there is an alarm output.
If the type is NC, this button is normally off. The button becomes off when there is an alarm output.
Figure 2-7 Alarm output