© Copyright Qvis ®. All documentation rights reserved.
9
2 Device Installation
Picture 2-1 Bracket installation
This camera can be installed on to a vertical wall, please refer to the following
steps on how to do this:
The installation surface/wall must withstand and hold at least three times the
weight of the bracket and camera.
Step 1: Install camera bracket to camera
For cement wall:
1. Insert the expansion bolts into the bracket holes at the camera end of
the bracket
2. Feed camera
’s network, power, and 485 controller cables through the
hollow part of the bracket.
3. Use the cross-head screwdriver to fix the adjust screws firmly into the
base of the camera device.
For installing camera to a wood based surface, you do not need to install
expansion bolts, use cross-head screwdriver to fix firmly.
Step 2: Install camera and bracket to wall
