© Copyright Qvis ®. All documentation rights reserved.
12
3. Click
‘
Set
’; the address will be modified. If set up is successful the PTZ
camera will rotate in a vertical direction, to indicate set up was success.
Picture 3-2
Note:
If the 485 cable is only connected to one PTZ camera, then it is
convenient for user to setup camera. The user can just input 0000000000
in to the
‘Dome ID’ box.
3.3 Set up camera through the AHD PTZ Configuration Tool
The PTZ camera configuration tool is shown in picture 3-3. The PTZ camera
needs to be connected to the computer using an RS485 adaptor. In the
address and baud rate edit box, the user needs to input the address and baud
rate of camera in order for it all to be set. Click
‘
Set
’ to complete setup.
