User Manual v.2
QVidium
®
QVENC4K™ UHD/HEVC Video Encoder
Copyright 2023 QVidium
®
Technologies, Inc.
Page 4 of 43
1.2 Accessing the Network Interface
To gain access to the control and status interface for the QVENC4K, you must first log in from a
web browser by entering the IP address assigned to your QVENC4K. By default, the IP address is
automatically configured via DHCP. If you do not know what IP address was assigned to your unit,
you can use our CodecManager application, described in Section 1.4, Network Setup.
Log in using the username, “admin” and the password also "admin".. For more detail on logging in,
please see Section 1.6, Password and Security. If you have trouble logging in, please try clicking
on the browser’s refresh control, usually shown as a counterclockwise circular arrow.
1.3 Dashboard and System Menu
The first menu item after logging in is the Dashboard, which shows relevant parameters for the
current state of the system, such as the current encoding network statistics, system uptime,
memory usage, and send and receive stats for the two network interfaces. This is shown below, in
Figure 1.
Figure 1. Dashboard and System Menu.
In Figure 1, we have expanded he
System
menu to show the available system settings:
Name,
Password, Time, Upgrade, Processes, Shutdown, and Reboot
. You can set the system name,
to help distinguish one QVENC4K from another, and change the password from the default (Serial
Number) to one of your own choosing,
You can update the firmware to the latest version, provided that your QVENC4K is connected to
the Internet, by clicking
System/Upgrade
. This will compare the various firmware modules on your