Configuring for Basic PLAY Operation
There are many aspects of the factory setup that may not apply to your installation or display
application. Therefore, you will want to “walk-through” the main menu screens not only to setup The
QuVIS Encore for your application but also to familiarize yourself with its broad feature set.
Use the following procedures to configure the QuVIS Encore for basic playback operations under local
front panel control.
For complete configuration procedures refer to
Chapter 4 - Front Panel GUI Interface
and
Chapter 5 - Modifying Configuration
Configuration tasks:
•
•
Select Analog Video Output Settings
•
•
Select Timecode Output Settings
Select Video Output Settings
1.
Press the
MENU
button to activate the menu list.
2.
Select
Output – Video
and press the
SELECT
button.
3.
Make the appropriate configuration changes on the
Output – Video
menu page.
a.
Set the
Play Style
(local control method) used for playback.
Play Selected Item – Plays the selected item(s) one time through.
Play Jog/Shuttle – Plays the selected item with shuttle control engaged. Frame jog is
available only from the paused playback state.
QuVIS Encore
Page 21
QSR Version 3.1
