background image

1.

A ceiling fan is an environmentally

smart choice to cool as well as to help 
warm your home or office.  Adjust your 
HVAC thermostat during fan use to save 
additional energy and money on your air 
conditioning and heating utility bills. You 
should see a significant reduction in both 
your heating and cooling costs by regular 
use of your fan. 

Do not hesitate to use your fan during 
summer and winter months.  In summer, 
(Fig. 16) using the reverse switch, adjust 
the fan's direction so cool air is blown 
down, producing a cooling breeze. In 
winter,  (Fig. 17) reverse the fan so that an 
upward airflow will push warm air off the 
ceiling and circulate it downwards into the 
living area.  In winter months, use the fan 
at a lower speed than summer.

2.

Periodically check tightness of all

screws securing the blades to the blade 
arm attachment points.  A clicking or a 
rattling noise is a sure indication of 
loosening screws.  Since screws will 
invariably work loose over time, at least 
once a year, tighten all the screws 
attaching blades to blade arms.  

Do not 

bend blade arms when cleaning or 
servicing the fan.

3.

Clean you fan periodically using only

a cloth dampened with a mild detergent 
solution for all hardware - never use 
solvents.  The finish plating is lacquered 
to prevent tarnishing.  Use a lint-free cloth 
with clean water to clean blades.

4.

You will never need to oil or lubricate

your fan.  Its permanently sealed bearings 
will provide trouble free, silent operation 
for many years.

5.

If repairs or servicing are ever

required, to avoid possible electric shock, 

turn off the electricity

 at the main fuse 

or circuit panel before you  begin.

9. FAN OPERATION AND CARE

Fig. 17

Fig. 16

WINTER

Содержание PROXIMA PATIO











Отзывы: