1. SAFETY RULES
2. UNPACKING YOUR FAN
1.
To avoid possible electric shock,
turn off the electricity
at the main fuse
box or circuit panel before you begin the
fan installation or before servicing the
fan or installing accessories.
2.
Read all instructions and safety
information carefully before installing
your fan and
save these instructions.
3.
Make sure all electrical connections
comply with local codes or ordinances
as well as the National Electrical Code.
If you are unfamiliar with electric wir-
ing, please use a qualified and licensed
electrician.
4.
Make sure you have a location
selected for your fan which allows clear
space for the blades to rotate, and at
least seven (7) feet of clearance between
the floor and the fan blade tips.
5.
The outlet box and ceiling support
joist used must be securely mounted,
and
capable of supporting at least 50
pounds.
To reduce the risk of fire,
electric shock, or personal injury, use
only an outlet box clearly labeled
“Acceptable For Fan Support”
.
6.
To reduce the risk of personal injury
use only approved hanging brackets and
screws supplied with this fan for
mounting to the outlet box.
7.
After installation is complete, check
that all connections are absolutely
secure.
8.
Do not insert anything into the fan
blades while they are rotating.
9.
Do not operate the reverse switch
until the fan has come to a complete
stop.
10.
Do not attempt to control the
operation of the fan (or an optional
light kit) from any wall control that is
not approved by Quorum for use with
its fans. Do not use solid state wall
controls. The use of an unapproved
control voids the fan’s warranty.
TOOLS REQUIRED
FOR INSTALLATION
Phillips Screwdriver
Wire Cutters
Electrical Tape
Step Ladder
Unpack your fan and check the contents. Do not discard the carton. If warranty
replacement or repair is ever necessary the fan should be returned in original
packaging. Remove all parts and hardware. Check all visible screws, bolts and nuts
for tightness. Examine all parts. The following parts should be included:
1. Set of 3 Blade Arms (a)
2. Canopy Assembly (b)
3. Ceiling Mounting Plate (c)
4. Set of 3 Blades (d)
5. Glass Motor cover (e)
6. Motor Assembly (f)
7. 8 Sets of Hanging Cables (g)
8. Light Kit Distributor (h)
9. Receiver & Wall Control Unit (i)
10. 50W GU-10 Lamp (j)
11. Parts Bags Containing:
• Blade Attachment Hardware -
screws/washers
• Mounting Hardware
(wire nuts, 2" wood screws)
• Extra Cable Retainers w/ Rubber
Inserts
• Plastic Cable Stopper (Electrical
Cable)
• Allen Wrench for Cable Cone
NOTE:
Some Quorum fan models will have slightly different
parts than what is shown here depending upon the
design you have chosen. Basic installation procedures
are similar for all models.
I
f
you
fInd
that
parts
are
mIssIng
,
contact
your
dealer
for
replacement
,
or
call
Q
uorum
dIrectly
and
we
wIll
replacements
to
you
ImmedIately
.
Model #14583-14-xx: 34.4 lbs.
b.
a.
f.
d.
e.
c.
g.
h.
i.
j.
