6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
Assembly Instruction Sheet #IS-DH43024AN
For Style DH43024AN
C
Hanger Nail
Mirror Hanger
Adjustment
Screw
Bracket Catch
Mark "B
"
Hole
3”
Figure 3
STEP 3
Locate Mirror Hangers and Mirror
-
A. Locate Mirror Hangers (A) and align the top center with
3” Locator mark. Secure them to wall surface with
Hanger Nails (B).
B. With Mirror Hangers properly installed, be sure that the
(2) Bracket Catches are approximately equal in length
from the top of Mirror Hangers (A). Adjust overall length
with Adjustment Screws.
C. With the help of another person, pass the Holes on the
Crossbars at the back of the Mirror over the Mirror
Hangers (A) so that the Crossbars rest on the inside of
the Bracket Catches.
Clean glass with household glass cleaner. Retain this
sheet for future reference.
Please be noted that the Mirror
Hangers are fully adjustable allowing for easy
leveling.
Crossbar
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
4of5
FOR HORIZONTAL
Figure 4
STEP 4
Mark Points for Mirror Hangers
-
A. Lift and position where the Mirror will reside on the wall
surface and with a tape measure, mark distance from
floor to the bottom edge of the frame with a pencil. Mark
should be located at a point representing ½ of mirror
width.
B. Place the Mirror on a flat surface with back facing you.
Measure the distance from the bottom edge of the
Mirror Frame to bottom edge of the Crossbar with Side
Holes. This represents distance “B” in the illustration.
C. With tape measure, add this distance to Mark “A” on
wall surface and mark with pencil.
D. Measure distance between the centerline of (2) Side
Holes. Add this ½ distance from Mark “B” on each side
and mark with pencil. (Distance “C” in the illustration)
E. Measure 3” up from Mark “C” and mark. These marks
are locators for the (2) Mirror Hangers. Check for marks
straightness with level.
2013 QuoizelInc.
February 2013
"
A”
Floor
Surface
½ WIDTH
"
B”
BACK
Side
Hole
Crossbar
"
C”
