6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
Figure 1
STEP 1
Assemble Mirror
-
A. Place the Mirror Frame (E) onto a flat working surface
with the back facing you. Carefully place the Mirror (F)
and Backing (H) to the Mirror Frame (E). Line up holes
on Crossbar (G) and mounting holes on the back of the
Mirror Frame (E).
b. By using screwdriver, thread Lock Screws (D) with
Washers (C) into the mounting holes on the Mirror
Frame (E) to secure the Mirror (F). Hand-tighten gently
until snug.
Assembly Instruction Sheet #IS-DH43024AN
For Style DH43024AN
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
3of5
Mirror
Frame
Mirror
Washer
Lock
Screw
FOR VERTICAL
Figure 2
STEP 2
Mark Points for Mirror Hangers
-
A. Lift and position where the Mirror will reside on the wall
surface and with a tape measure, mark distance from
floor to the bottom edge of the frame with a pencil. Mark
should be located at a point representing ½ of mirror
width.
B. Place the Mirror on a flat surface with back facing you.
Measure the distance from the bottom edge of the
Mirror Frame to top edge of the Holes on Crossbars.
This represents distance “B” in the illustration.
C. With tape measure, add this distance to Mark “A” on
wall surface and mark with pencil.
D. Measure distance between the centerline of (2) Holes.
Add this ½ distance from Mark “B” on each side and
mark with pencil. (Distance “C” in the illustration)
E. Measure 3” up from Mark “C” and mark. These marks
are locators for the (2) Mirror Hangers. Check for marks
straightness with level.
Crossbar
2013 QuoizelInc.
February 2013
Backing
"
A”
Floor
Surface
½ WIDTH
"
B”
BACK
"
C”
