QUNDIS Qheat5, Руководство по установке

Страница: 33 / 40

33
Commissioning
Example: Switch the checksum display on / off (postcard readout)
Display level L3 - display "po active levels"
1. Activate programming mode using the key combination < H > + < V >
(
see Page 31
). When programming mode is activated,
the "M-" symbol will flash.
If the marking is not set on the "M-" symbol, press the < H >
key briefly until the "M-" symbol flashes.
2.
Press the < V > key briefly if the "display checksum"
option is to be switched on or off.
6.
Confirm the setting by means of the key combination < H > + < V >
(see pagePage 31)
.
Example: Activate / deactivate levels
Display level L3 - display "po active levels"
1.
Activate programming mode using the key combination
< H > + < V >
(see pagePage 31)
. When programming mode
is activated, the "M-" symbol will flash.
2.
Press the < H > key several times briefly until the segment
block for setting the respective level flashes.
3.
Press the < V > key briefly in order to deactivate
or activate the respective level.
4.
Press the < H > briefly to jump to the number of the next
available level.
5. Repeat steps 3 and 4 until the required levels have been activated / deactivated.
If display level 3 is deactivated, the device can then only be parameterised using the
parameterisation software.
6.
Confirm the setting by means of the key combination < H > + < V >
(see pagePage 31)
.
Result of this example:
Levels 2, 3, 4 and 5 are shown,
= Level 6 is hidden,
2x space = Levels 7+8 are not available =Level 9 is hidden